Polyurethane Raw Materials for PU Sport Track and Silicon PU Sport Floor Coating. The Yourun PU material includes the following products.
Super low TVOC PU Catalysts.
Catalysts for PU material of two-component system
Catalysts for PU material of moisture cured one-component system
Liquid Chain Extender or Crosslinker for PU material
Functional Additives for PU material including Dispersant, Viscosity Reducer, Anti-settling Agent, Anti-yellowing Agent, Antioxidant, Defoamer or Defoaming Agent, Theological Agent, etc.
Polyurethane Raw Materials for PU Sport Track and Silicon PU Sport Floor Coating.
Please click the model code to see the TDS.
Name | Model | Property | Application |
Catalyst (Low TVOC) | CUCAT-V17A&V18 | V series products are specially developed to fully ensure that the products meet the strict requirements of TVOC standards. | Two-component materials (all plastic, mixed and composite sport track materials, two-component silicon PU materials) |
CUCAT-V19 | V series low TVOC catalyst, quick curing at low temperature, suitable for winter construction | ||
WCAT-WS11&WS11A | Low TVOC moisture cured catalyst, WS11 is suitable for high-temperature construction in summer, reducing bubbles and pinholes; WS11A enhances the catalytic activity under low temperature and low humidity conditions, solving the problem of slow curing at low-temperature in winter. | One-component materials (silicon PU, adhesive, breathable sport track materials) | |
Catalyst (for two-component system) | BCAT-20AP | Eco-friendly organic bismuth catalyst, bismuth metal content：20±0.5% | Two-component materials (all plastic, mixed and composite sport track materials, two-component silicon PU materials) |
ZCAT-X16 | Eco-friendly organic zinc catalyst, zinc metal content(%):16±0.5, Low viscosity and easy to mix | ||
BX1124&2123 | Orgainc bismuth / zinc compound catalyst，bismuth:zinc=1:4 / 2:3 | ||
BCAT-20BP | Economical organic bismuth environmental drier, bismuth metal content(%):20±0.5 | ||
ZCAT-Z19P | Economical organic zinc environmental drier, zinc metal content(%):19±0.5. Low viscosity, easy to add | ||
CUCAT-HC | It is suitable for micro foaming playground materials. When used in combination with organic bismuth / zinc, it can adjust the foaming ratio, provide fine and uniform micro foaming effect, have good surface flatness after curing,and avoid large bulges. | Two component foaming material | |
Catalyst (for one-component moisture-cured system) |
WCAT-WS17 | High catalytic activity at low temperature. It solves the problem that the curing of T12 is too slow at low temperature. It maintains good catalytic effect at low temperature (5 ℃), which shortens the curing time more than twice of that of T12. The catalytic activity is also higher than T-12 in summer. The storage stability is good, and the material viscosity is relatively low. | One-component materials (silicon PU, adhesive, breathable sport track materials) |
WCAT-WS12A | Recommended for PU adhesive, without affecting the appearance, color and transparency of adhesive. | ||
WCAT-WP01A | High activity, the addition amount is half of T12, and the catalytic activity is still higher than T12.The low-temperature catalytic effect is good, it maintains good catalytic effect in the low-temperature (5 ℃). Especially recommended for aliphatic one component systems. |
Anti-yellowing adhesive | |
WCAT-W30B | It is suitable for micro foamed silicon PU materials. Low temperature does not affect foaming, and provides fine and uniform micro bubble effect. The surface is flat without bulging, which can save about 20-30% of the material consumption. | One-component silicon PU foaming material | |
Crosslinker (Chain Extender) | TDMA Series 02&G55 | Environmentally friendly, MOCA free, Low odor, liquid at normal room temperature, fast curing and forming, and good flexibility of finished products.If used with silicon PU of TDI and MDI type, it can realize one-time construction thickness of 8mm without bubbling and bulging.Reaction rate: TDMA-02 = TDMA-G90 ＞ TDMA-G55 ≧ MOCA. TDMA-G90 solves the flaw of micro adhesion the surface after curing. |
Sport track, silicon PU material |
TDMA-G55 | |||
TDMA-G90 | |||
TDMA-M86 | Economical and eco-friendly chain extender, free of MOCA, low odor, liquid at normal room temperature, reaction rate and molding physical properties close to that of MOCA. | ||
Dispersant | YRFC-06A | It is Neutral non-ionic dispersant which can be dispersed and adsorbed on the surface of a large number of powder particles by adding a very small amount. By effectively reducing the adsorption between powder particles, it can prevent the accumulation and hardening of powder filler and reduce the viscosity of solvent-free formula with high powder content. | Applicable to both one and two components PU system |
Viscosity Reducer | YRFC-11 | It is faintly acid dispersant which has excellent powder dispersion and viscosity reduction effect. It is recommended to be used for single component silicon PU materials with high powder content, runway materials, etc., without affecting the curing speed of materials. | |
Anti-settle Agent | YRFC-12 | Efficient anti settling and anti hardening agent. It can solve the problem of coarse particles and low mesh fillers being prone to settling and hardening at the bottom of the barrel. It has the characteristics of anti settling, leveling, and viscosity reduction, and is more inclined to improve the anti settling and leveling characteristics compared to dispersed viscosity reducers. | |
Anti-yellowing Antioxidant | UVK-PG04 | Highly effective anti UV and anti yellowing additive, recommended for adhesive, can significantly delay the yellowing of adhesive under strong UV radiation in summer. | |
UVK-PG03B | It is high efficiency anti UV and anti pulverization additives, liquid and easy to use. Adding a small amount can significantly improve the problems of material surface pulverization, stickiness, discoloration and delamination under high temperature and high humidity construction environment. | ||
UVK-PGO | Liquid efficient antioxidant and anti-pulverizing agent, recommended to be used in combination with PG03B,which can significantly delay the aging phenomenon of polyurethane materials such as yellowing, pulverization, and delamination under strong ultraviolet radiation in summer. | ||
Defoamer | YRXP-07B | It is high efficiency defoamer which can eliminate bubbles caused by mixing and paving, and does not affect the adhesion between layers. | |
Theological Agent | YRFC-CBA
| Liquid at normal temperature, no heating required for melting, low viscosity, high speed dispersion,moderate stirring can reach thixotropic non-newtonian fluid state, greatly simplifying production process and improving production efficiency. The same thixotropic effect can also be achieved by adding at the construction site. | Spray PU material |
